Table of Contents
Advertisement
User's Guide
Customer Support
Your autoprinter was subjected to rigorous quality control testing and inspection, however, if your system is not working
properly please contact our support department so we can ensure that your autoprinter is running properly. We strive to
build the best product possible and we desire that every customer feel confident recommending Recordex products to their
friends. If you are not fully satisfied please call our Customer Service Center today and we will do our best to make things
right.
Customer Service Center
Recordex USA, Inc.
PO BOX 848
105 North Anderson Drive
Swainsboro, GA 30401
P. 1-478-237-5501
F. 1-478-237-5504
Safety Precautions
Please read through these important safety precautions and recommendations before setting up your autoprinter
!
to ensure safe and trouble free operation.
Autoprinter are high-precision electronic devices. Do not use them in any manner other than as specified in this
!
user's guide.
To prevent fire, shock, or other health risks do not expose the unit to moisture or rain.
!
To prevent electronic shock do not attempt to disassemble or modify the autoprinter or any of its internal compo-
!
nents. Refer all servicing to authorized service centers.
The autoprinter warranty will become void if the unit is modified or serviced by unauthorized personnel.
!
Operating Environment
Before unpacking your autoprinter select an appropriate operating environment for your system. You should look for an
area that meets these criteria:
·
A level and stable work surface,
·
In an area with good ventilation, low dust and no smoke,
·
With moderate temperature and humidity,
·
And access to an outlet with stable power
i
Consider using an uninterruptible power supply with surge protection (UPS) to protect your duplicator.
You're autoprinter is able to operate in both 110 and 220V environments. The factory default is 110V but if you
2
live an a region of the world that operates at 220V you can simply use a standard computer power cord for your
region of the world.
©2007 Recordex USA, Inc. All rights reserved.
Version: 1.1
i
Important: Your autoprinter will not oper-
ation properly if installed on a surface
that is not level. For discs to feed proper-
ly the autoprinter must rest on a level sur-
face.
TM
®
Recordex StudioJet
6
Advertisement
Table of Contents
