Related Manuals for Recordex StudioJet 50
Summary of Contents for Recordex StudioJet 50
- Page 1 QUICKSTART GUIDE StudioJet AutoPrinter 50 or 100 Disc AutoPrinter Manual for Models: StudioJet 50™ StudioJet 100™...
- Page 2 Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide...
-
Page 3: Important! Read First
IMPORTANT! READ FIRST! The specific return policy for your printer will depend on the re- turn policy of the Recordex retailer/dealer where you purchased your autoprinter. Recordex will not accept any returned printers if the ink car- tridges have been installed. Once the printer has been opened and ink cartridges have been installed the user agrees to keep the printer and the 30-day return policy is void. - Page 4 Save the box and packaging material for return shipment should your printer require service. NOTE: StudioJet 50 Depicted. StudioJet 100™ will include a 100 capacity output bin and longer input spindles. Figure 1.1 Printer Contents Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide...
- Page 5 STEP 2: Assemble AutoPrinter Slide the output bin into the right front of the printer base. (see Figure 2.1) Figure 2.1 Insert Output Bin Screw the four input spindles down onto the top of the loading mechanism. (see Figure 2.2) Figure 2.2 Assemble Input Spindles Load blank inkjet printable media into the input bin on the top of the printer.
-
Page 6: Step 4: Install Ink Cartridges
3. Lift Cartridge cover and insert cartridge into printer. (See Figure 4.1) NOTE: The cartridges provided with your printer are starter cartridges and will provide approximately ½ the yield of a standard cartridge. For the low- est cost per print Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide... - Page 7 STEP 5: Install XP Printer Driver Insert the StudioJe™t Installation Disc into your CD/DVD drive. After a few seconds an installation menu will be displayed. For now you can ignore the install menu. Connect the StudioJet™ to your computer with the supplied USB cable. After a few sec- onds the computer will report that it has found new hardware.
- Page 8 Add New Hardware Wizard to install the printer driver. Refer to the screen shots to the left as you proceed through the Add New Hardware wiz- ard. Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide...
-
Page 9: Step 6: Install Quicktime
STEP 6: Install QuickTime 7.0 In order to use the included Discus LE 4 disc label editor software you need to install Quick- Time 7.0 or later on your computer. To install QuickTime click on the install button on the Install Menu and follow the installation prompts. - Page 10 Discus, otherwise you’re disc print job will be sent to one of the other printers installed on your computer. Phone: 415-669-7010 (10am to 7pm PST) Fax: 415-669-7009 Email: support@magicmouse.com Web: http://www.magicmouse.com/h_support.html Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide...
- Page 11 A: Your Discus serial number is located on the front of your installation & set- up disc. A: This will vary greatly based on what you are printing and the print quality setting that you use. We’ve found that we can print 450 to 525 discs with an average amount of text and color coverage (40%).
- Page 12 SOLUTION: Use the disc alignment feature if you are using Discus to align the disc. Or alter the mask settings, or center offset as necessary. See Pages XX-XX of the Quick Start Guide. Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide...
- Page 13 This refers to how the printed image aligns with the outer and inner edge of the disc. The disc is out of alignment if their is uneven white space (I.e. Un-printed) on one or two edges of the disc edge. See the illustration below.
- Page 14 3. This will open the Printer Preferences Menu where you can select from a number of printer driver utilities and settings. You’ll see a tab for Mask Settings, and one for Alignment. Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide...
- Page 15 First, make sure the enable masking check box is checked. If your image is not printing all the way to the outer edge then increase the Outer Diameter setting. If you image is not printing all the way to the inner edge then decrease the Inner Diameter setting.
- Page 16 If the autoprinter develops a covered defect within the first year, Recordex will, at its option, either repair or replace the autoprinter at no charge, provided that the autoprinter is returned during the warran- ty period.