Operating Determinations - Omnitronic X-2 User Manual

Speaker-system
Hide thumbs Also See for X-2:
Table of Contents

Advertisement

Available languages

Available languages

OPERATING DETERMINATIONS

This speaker-system is a passive system which can be used for permanent installations or for mobile use.
This product is only allowed to be connected with an appropriate power amplifier and was designed for
indoor use only.
The maximum power of the speaker-system must never be exceeded. When operating the speaker-system,
please make sure that the loudspeakers always sound well. When distorsions can be heard, either the
amplifier or the loudspeaker is overloaded. Overloads can quickly lead to amplifier or speaker damage. In
order to avoid damage, please reduce the volume immediately when distortions can be heard. When
speaker-systems are destroyed by overload, the guarantee becomes void.
By operating speaker-systems with an amplifier, you can produce excessive sound pressure levels that may
lead to permanent hearing loss. Please refer to the explanations under "Legal instructions".
Speaker-systems must only be operated by trained persons.
Danger of Life due to crashing speaker-systems or hearing loss due to excessive sound pressure
levels! The different local conditions have to be considered in terms of safety rules.
When using smoke machines, make sure that the speaker-system is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and speaker-system.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
This speaker-system must only be installed at a solid, plane, anti-slip, vibration-free, oscilation-free and fire-
resistant location.
Please note: when using this speaker-system in public or industrial areas, a series of safety instructions
have to be followed that this manual can only give in part. The operator must therefore inform himself on the
current safety instructions and consider them.
Before installing the system, make sure that the installation area can hold a minimum point load of 5 times
the system's load (e.g. weight 20 kg - point load 100 kg).
The speaker-system must never be installed higher than 100 cm without secondary attachment.
For overhead use (mounting height >100 cm), always fix the speaker-system with an appropriate safety-
rope.
This speaker-system must never be installed on a wall-mounting because the secondary
attachment cannot be fixed.
This speaker-system may only be installed on top of another speaker-system if both systems are lashed up
with each other via appropriate clamping belts and protected against flipping over.
This speaker-system must only be suspended by experienced and trained persons - Danger to
Life due to crashing speaker-systems!
If the original speaker-system is equipped with an appropriate flange:
This speaker-system can be installed on top of a subwoofer (satellite system), on a speaker stand, an
appropriate stand or an appropriate wall-mounting. The carrying capacity of the distance-tube, the speaker
stand, the stand or the wall-mounting must never be exceeded.
WARNING!
DANGER!
DANGER!
24/44
11039860_V_1_0.DOC

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents