Introduction; Safety Instructions - Omnitronic X-2 User Manual

X-2 Speaker-system
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this speaker-system has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen an OMNITRONIC speaker-system. If you follow the instructions given in this
manual, we are sure that you will enjoy this speaker-system for a long period of time.
Unpack your speaker-system.

SAFETY INSTRUCTIONS

This speaker-system has left our premises in absolutely perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.
Please make sure that there are no obvious transport damages. Should you notice any damages on the
connection panel or on the casing, do not take the speaker-system into operation and immediately consult
your local dealer.
The materials used in this speaker-system are normally flammable. If B1 is required at the install-
ation place, the the surface must be treated with an appropriate fire retardant in regular intervals.
USER MANUAL
CAUTION!
Keep this device away from rain and moisture!
Never open the housing!
DANGER OF BURNING!
22/44 11039860_V_1_0.DOC