Advertisement
Dip Switch Functions
LL (Line-Lock) Off/On
To select the sync mode between Internal Sync.(LL off) and Line-Lock
(LL on).
Set the line-lock off, the camera will synchronize to the internal time
base. Set the line-lock on, the camera's vertical synchronization can be
driven by the AC signal in the power lines.
Note: Line-Lock sync mode operation is possible only when used with
an AC power source; it's not possible with a DC power source.
The default setting is ON.
AGC (Automatic Gain Control) Off/On
AGC ON: The sensitivity increases automatically when light is low.
AGC OFF: A-low-noise picture is obtained under a low light
condition.
The default setting is ON.
Vari-Focal Lens
9
Advertisement
