EverFocus EHD525EX User's Manual And Operation Instructions
Hide thumbs
Also See for EHD525EX:
- Operation instructions manual (16 pages) ,
- Specifications (14 pages) ,
- Quick reference manual (4 pages)
Related Manuals for EverFocus EHD525EX
Summary of Contents for EverFocus EHD525EX
- Page 1 EHD525EX 1/3” Color Rugged Dome True Day/Night Camera 1/3” Color Rugged Dome True Day/Night Camera with EXView Sensor with EXView Sensor User’s Manual Operation Instructions...
- Page 2 Notice This manual is presented to the users of EHD525EX series by EverFocus Electronics Corp. With years of engineering researches, EverFocus has spared no effort to provide the high quality products to the worldwide users. For the policy of continual product improvement, EverFocus reserves the right to make changes to the product specifications and documentation without notice.
-
Page 3: Table Of Contents
Table of Contents Safety Warning ……………………………………. Introduction………………………………………... Specifications………………………………………..3 Installation Instructions…………………………… Dip Switch Functions……………………………… Simple Instructions for the Desiccant Pack……… 13... -
Page 4: Safety Warning
Safety Warning 1. Do not install the camera near electric or magnetic fields. Install the camera away from TVs, radio transmitters, magnets, electric motors, transformers, and audio speakers as the magnetic fields generated from these devices will distort the video image. 2. -
Page 5: Introduction
The extremely durable EHD series are unquestionably one of the world's toughest cameras and is your best choice for vandal resistance. The EHD525EX is designed with True Day/Night function that allows removable Auto IR Cut and an enhanced B/W sensitivity, while turning the image from color to B/W. -
Page 6: Specifications
Specifications Model: EHD525EX Pickup device: SONY 1/3” interline transfer color EXView CCD Picture element: NTSC: 768(H) × 494(V) PAL: 752(H) × 582(V) Horizontal Resolution: 520 TV Lines Sensitivity: 0.1 lux / F=1.2 S/N ratio: >52dB(AGC off) Vari-Focal Lens: 3.6-9mm / 9-22mm IR Lens... -
Page 7: Installation Instructions
Installation Instructions 1. Loosen the 4 fix screws on the housing cover by using the provided wrench (Figure 1). Carefully uncap the housing cover as the direction shown below (Figure 2); please pay attention not to damage the lens. To remove the housing cover, push the hinges to the bottom of the bracket, the hinges can be easily removed from the bracket. - Page 8 3. Mounting the base. Side conduit entry Conduit plug setscrew Back conduit entry Mounting Setscrew Mounting Setscrew Mounting Setscrew Mounting Setscrew Figure 4 Attach the base to the wall or ceiling; fix the base by the 4 setscrews provided in the accessory pack. The dome weight is approximately 3.7 lbs, please make sure if the mounting is strong enough to support the weight.
- Page 9 4. Re-assemble Camera I. When mounting COLOR RUGGED DOME CAMERA on the wall, please aim the “Wall” in line with the triangle “ ” marked on the lead frame. (Factory default) Figure 6-1 “Wall” II. When mounting COLOR RUGGED DOME CAMERA on the ceiling, please aim the “Ceiling”...
- Page 10 5. Wire Connection Termination Board Micro Switch for Alarm trigger Power In Alarm COM Video Power In Alarm NO V. Phase Adjustment VR Alarm NC Figure 7 Connect the power supply cable (AC24V/DC12V), video output and alarm output to the proper connectors shown as Figure 7. The V.
- Page 11 6. View Angle Adjustment The camera can be rotated 360° horizontally, 140° vertically and 60° 3’rd axis view angles (as shown in Figure 8). Adjust the proper camera view angle as needed. If a vari-focal lens is used, you may adjust the focus and zoom of the lens to bring the object in focus.
- Page 12 7. Reposition the adjustment stick (only for 3.6-9mm Vari-focal lens) a) The default position of adjustment stick is shown as below:...
- Page 13 b) While zooming In/Out with the adjustment stick, it may obstruct other adjustments of Iris Level and Video Output. c) In this case, you can gently take off the adjustment stick and place it to the other hole at its right-hand side. This will allow you to adjust zooming function smoothly.
-
Page 14: Dip Switch Functions
Dip Switch Functions Vari-Focal Lens LL (Line-Lock) OFF/ON Set the line-lock off the camera will synchronize to the internal time base. Set the line-lock on, the camera’s vertical synchronization can be driven by the AC signal in the power lines. Note: Line-Lock sync mode operation is possible only when used with an AC power source;... - Page 15 BLC (Back Light Compensation) ON/OFF When BLC is turned ON, the AGC, ES and IRIS operating points are Dip Switch Functions determined by averaging over the center area instead of the entire field-of-view, so that a dimly-lit foreground object at center area can be clearly distinguished from brightly-lit backgrounds.
-
Page 16: Simple Instructions For The Desiccant Pack
Simple Instructions for the Desiccant Pack To prevent humidity from building inside the dome, use the desiccant pack which absorbs humidity: 1. Adjust all settings first and place the desiccant pack on the horizontal rod, then bend the horizontal rod and fix it. 2. - Page 17 EverFocus Electronics Corp. European Office: Head Office: Albert-Einstein-Strasse 1 12F, No.79 Sec. 1 Shin-Tai Wu Road, D-46446 Emmerich, Germany Hsi-Chih, Taipei, Taiwan TEL: 49-2822-9394-0 TEL: +886-2-26982334 FAX: 49-2822939495 FAX: +886-2-26982380 www.everfocus.de www.everfocus.com.tw China Office: USA - California Office: Room 609, Technology Trade Building, 1801 Highland Ave.
Need help?
Do you have a question about the EHD525EX and is the answer not in the manual?
Questions and answers