818 Sport Models
Operation
Cold Power Switch
12
1. After connecting the water the tank will begin to fill. Put the
plug in the socket and the indicator lights will be lit. Try
pressing the cold water button to see if water comes out.
When water flows out of the dispenser, the cold power switch
may be turned on and it is ready to use. Please do not turn on
the power switch until water flows out of the machine, to avoid
damage. Allow up to one hour for minimum temperature
water. Flush through 10 litres of water.
2. When the cold power switch is
turned on, the chilling LED will be
on. When the set temperature is
reached, the LED will go out.
Fused IEC Socket