Switch Housing - Hunter Ceiling Fans Installation And Operation Manual

Switch Housing

www.HunterFan.com
1.866.268.1936
Feed the wire plug through the center
Screw two housing assembly screws Insert the third screw, found in
from the hardware bag halfway into hole of the upper switch housing, then
the hardware bag, into place and
wrap keyhole slots around the screws and
the motor housing. It does not matter then tighten all three screws.
twist counterclockwise.
which two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
14
M3546-01 • 11/13/13 • © Hunter Fan Company