Light Kit
Connect the plugs from the upper and
lower switch housings. Make sure to line up
the colored markings on the connectors.
Screw
Holes
Place the light kit over the upper switch
housing and align the screw holes.
15
M3546-01 • 11/13/13 • © Hunter Fan Company
www.HunterFan.com
Install three housing screws, found
in the
hardware bag. Tighten all
three screws securely.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
1.866.268.1936