Hunter Ceiling Fans Installation And Operation Manual page 8

Downrod (continued) www.HunterFan.com
1.866.268.1936
3/8 in.
8 in.
KEEP!
Remove the pre-installed The wires can be cut, but
Hand tighten the downrod (at Tighten the setscrew
setscrew so that the downrod leave at least 8 inches (20
least 4-5 full turns) until it stops. with pliers. DO NOT
can be inserted. centimeters) extending from
HAND TIGHTEN.
the top of the downrod.
3/8 in.
8 inches (20 centimeters)
.95 cm
If the setscrew is not tightened
securely, the fan may fall.
8
M3546-01 • 11/13/13 • © Hunter Fan Company