Blades
www.HunterFan.com
1.866.268.1936
Lightly attach the blade irons to the
Install the grommets, found in the
hardware
motor with screws found in
bag, in the blades by hand. Place each blade
the
hardware bag, then securely
between a blade iron and medallion. Install three
tighten after both screws are attached.
blade screws, found in the
hardware bag, to
attach the medallion to the blade iron. Repeat
Your blades are shielded with Dust Armor® which
for all blades.
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
13
M3546-01 • 11/13/13 • © Hunter Fan Company