CAUTION
Figure 16
Activity LED
Attention LED
Busy indicator
The busy indicator LED flashes to indicate that a read operation is
occurring.
Do not push the eject button while this LED is flashing. If you do, the
operation in progress is aborted, and the DVD-ROM is ejected, possibly
causing a loss of data.
Eject button
Push the eject button to eject DVD-ROMs from the drive.
Optional DAT drive
The DAT drive is located on the right of the operator panel, as shown in
Figure 13 on page 22. The DAT drive front panel contains two indicator
LEDs and an eject button, as shown in Figure 16.
DDS-3 DAT drive front panel
Tape Clean
LEDs
The two LEDs provide operating information for normal as well as error
conditions. Table 2 shows the meaning of the different LED patterns.
Chapter 2
Indicators, switches, and displays
Operator panel
Eject button
25