Table of Contents
Advertisement
Configuration utilities
Configuration utilities
Configuration utilities
V2500/V2600 diagnostics provides utilities that assist the user with
configuration management.
autoreset
autoreset allows the user to specify whether ccmd should
automatically reset a complex after a hard error and after the hard
logger error analysis software has run. autoreset occurs if a
ccmd_reset file does not exist in the complex-specific directories
Arguments to autoreset arguments include <complex_name> on and
<complex_name> off or chk.
The output of the chk option for a complex name of hw2a looks like:
Autoreset for hw2a is enabled.
or
Autoreset for hw2a is disabled.
autoreset determines the behavior of ccmd when it encounters an error
NOTE
condition. ccmd makes its decision whether to reset a complex
immediately after running hard_logger. Enabling autoreset after
hard_logger has run does not reset the complex.
est_config
est_config is a utility that builds the node and complex descriptions
used by est. est_config reads support files at
/spp/data/DB_RING_FILE, reads the electronic board identifier (COP
chip) and scans to completely describe the node or complex. It also uses
the hardware database created by ccmd. The data retrieved is organized
and sorted into an appropriate node configuration file in the /spp/data/
<complex name> directory.
An optional configuration directory can be specified using the -p
argument. est_config works across all nodes unless a specific node or
complex is requested with the -n option.
110
Chapter 5
Advertisement
Table of Contents
