Starting The Console From The Workspace Menu; Starting The Console Using The Sppconsole Command - HP 9000 V2500 SCA Operator's Manual

Step 1. Move the pointer over the CDE workspace backdrop.
Step 2. Press and hold down any mouse button. The Workspace (root) menu
Step 3. Drag the mouse pointer to the "V-Class Complex: complex_name" option.
Step 4. Release the mouse button to select the option.
Step 5. Drag the mouse pointer to the Console option.
Step 6. Release the mouse button to select the option.
Step 7. Select the desired V2500/V2600 complex.
NOTE
Step 8. Select Console menu.
Step 9. Select Node X/complex. The new console window appears.
Step 1. Select a shell window by placing the mouse pointer in the window.
Step 2. If more than one V-Class complex is connected to the SSP, use the
SSP operation
Using the console

Starting the console from the Workspace menu

To start the console using the Workspace menu, complete the following
steps:
appears.
If the desired V2500/V2600 Complex name is not listed in the menu,
restart the Workspace manager. The desktop Workspace menus are
updated whenever a node is configured or deconfigured, but the new
menus are not activated until the Workspace Manager is restarted.

Starting the console using the sppconsole command

This method of starting the console works from the SSP or after logging
on ot the SSP from another system.
To start the console using the sppconsole command, complete the
following steps:
set_complex command to select the desired complex by entering:
.
set_complex
An output similar to the following will be displayed. Enter the desired
complex from the list provided.
46 Chapter 3