5
Configuration utilities
This chapter describes server configuration management and includes:
• ts_config
• ccmd
• xconfig
• Configuration utilities
Two utilities, sppdsh and xconfig, allow reading or writing
configuration information. OBP can also be used to modify the
configuration.
The SSP allows the user to configure the node using the ts_config
utility. This is the preferred method for V2500/V2600 servers.
ts_config configures the SSP to communicate with the node. The SSP
daemon, ccmd, monitors the node and reports back configuration
information, error information and general status. ts_config must be
run before using ccmd.
Chapter 5
71