Table of Contents
Advertisement
NOTE
SSP log-on
Two UNIX user accounts are created on the SSP during the HP-UX 10.20
operating system installation process.
This user is the normal log-on for the SSP during
sppuser
system operation, verification, and troubleshooting.
Default password:
Please note the space between spp and user.
This user has the ability to modify and configure every
root
parameter on the SSP.
Default password:
If the passwords to these accounts are changed by the customer, the new
passwords must be supplied to the Hewlett-Packard Customer Engineer
(CE) upon request.
SSP sppuser windows
When the user is logged on to the SSP on a V2500/V2600 server that
consists of less than two nodes, the windows appear in the configuration
shown in Figure 19. The Workspace, however, does not appear until a
mouse button is clicked anywhere in the CDE backdrop.
If the V2500/V2600 server consists of more than two nodes, the console
windows are replaced by a consolebar as shown in Figure 20.
Chapter 3
spp user
serialbus
SSP operation
SSP log-on
37
Advertisement
Table of Contents
