Cisco 7940 Reference Manual page 2

ADJUST THE HANDSET SPEAKERPHONE, OR HEADSET
VOLUME
1. During a call, press the volume button [+] up or [-]
down.
2. To apply the new volume level, press the
TO SETUP SPEED DIALS ON YOUR IP PHONE
1. Go to: MYPHONE.UWEC.EDU
2. You will see the following message: "There is a problem with
this website's security certificate." Click "Continue to Website."
3. Sign in with your university username and password.
4. Click
USER OPTIONS > DEVICE
to the image below, with your dept-name-phone # listed.
5. Click .
SPEED DIALS
6. Type the number in as if you were dialing it. (Remember,
use 36xxxx for campus lines, 9xxxxxxx for off-campus
local calls, and 81xxxxxxxxxx for long-distance calls.)
7. Tab to the label. Type in whatever description you wish.
When you tab to the ASCII Label, the same information will appear.
8. Click at the bottom of the page, or use the Save
SAVE
icon at the top of the page.
9. You can have up to 99 abbreviated dial settings. These will
not appear on your phone; this page is the only record
you will have of the abbreviated dials.
September 2013
CISCO IP PHONE SERIES REFERENCE GUIDE
soft key.
SAVE
. You will see a screen similar
CHANGING THE RING
1. Press the button.
SETTINGS
2. Press 2 for ring type.
3. Press soft key to choose "default ring."
SELECT
4. Use the button to scroll through the list of ring types.
NAVIGATION
5. To hear a sample, press the
6. To save your selection, press
CISCO 7940
CISCO 7960/7962
soft key.
PLAY
.
SELECT>OK>EXIT
Page 2