[White Gain]; [System Daylight View]; [Sharpness]; [Noise Reduction] - Panasonic PT-DZ770EL Operating Instructions (Functional Manual)

7) Press the <ENTER> button.
▶
z The [COLOR TEMPERATURE NAME
CHANGE] screen is displayed.
8) Press ▲▼◀▶ to select the text, and
press the <ENTER> button to enter the
text.
9) Press ▲▼◀▶ to select [OK], and
press the <ENTER> button.
▶
z The name set to color temperature is changed.
Note
z When a name is changed, display of [USER] on the
menu is also changed.

[WHITE GAIN]

You can adjust the brightness of white areas of the
image.
1) Press ▲▼ to select [WHITE GAIN].
2) Press ◀▶ or the <ENTER> button.
▶
z The [WHITE GAIN] individual adjustment
screen is displayed.
3) Press ◀▶ to adjust the level.
Operation Adjustment
Increases the
Press ▶ .
luminance of white.
Image becomes
Press ◀ .
natural.

[SYSTEM DAYLIGHT VIEW]

You can correct the image to the optimal vividness
even if it is projected under a bright light.
1) Press ▲▼ to select [SYSTEM
DAYLIGHT VIEW].
2) Press ◀▶ or the <ENTER> button.
▶
z The [SYSTEM DAYLIGHT VIEW] individual
adjustment screen is displayed.
3) Press ◀▶ to switch [SYSTEM
DAYLIGHT VIEW].
▶
z The setting will change as follows each time
you press the button.
[OFF] (No
correction)
[3] (High)
Range
Maximum
value +10
Minimum
value 0
[1] (Low)
[2] (Medium)
[PICTURE] menu

[SHARPNESS]

You can adjust the sharpness of the projected image.
1) Press ▲▼ to select [SHARPNESS].
2) Press ◀▶ or the <ENTER> button.
▶
z The [SHARPNESS] individual adjustment
screen is displayed.
3) Press ◀▶ to adjust the level.
Operation Adjustment
Contours become
Press ▶ .
sharper.
Contours become
Press ◀ .
softer.
Note
z If you press ▶ while the adjustment value is [15],
the value will become [0]. If you press ◀ while the
adjustment value is [0], the value will become [15].

[NOISE REDUCTION]

You can reduce noises when the input image is
degraded and noise is occurring in the image signal.
1) Press ▲▼ to select [NOISE
REDUCTION].
2) Press ◀▶ or the <ENTER> button.
▶
z The [NOISE REDUCTION] individual
adjustment screen is displayed.
3) Press ◀▶ to switch [NOISE
REDUCTION].
▶
z The setting will change as follows each time
you press the button.
[1] (Low)
[OFF] (No
correction)
Attention
z When this is set for an input signal with less noise,
the image may look different from what it originally
was. In such case, set it to [OFF].
Range
0 - 15
[2] (Medium)
[3] (High)
ENGLISH - 49