Front Panel; Line Cards And Modules; D6100I; Back Plate - Bosch Conettix D6600 Installation And Operation Manual

Conettix D6600/D6100i | Installation and Operation Guide | 4.0
.
3.2

D6100i

The difference between the D6100 and
the D6100i is the D6100i has a built in
Ethernet connection.
3.2.1

Front Panel

Figure 4: D6100i Communications Receiver/

Gateway (Front View)

1 – Liquid crystal display (LCD) - Displays up to
80 characters of information (two lines of up to
40 characters each)
2 – 23-button keypad
Table 2 on page 6 and Table 3 on page 7 define the
D6600/D6100i POWER and SYSTEM TROUBLE
LEDs.
3.2.2

Line Cards and Modules

The D6100i does not use the same line cards and
modules as the D6600. These functions are built in.
3.2.3

Back Plate

Figure 5: D6100i Communications Receiver/

Gateway (Rear View)

8 7
1 – Telephone line
connections
2 – Input/output ports
3 – COM4 RS-232 port
4 – COM3 auxiliary
RS-232 port
Bosch Security Systems, Inc. | 9/08| 4998122704-04
1
1 2
6 3
5 4
5 – Parallel port
connection
6 – Ethernet port
(D6100i only)
7 - USB port
8 – Power connection
terminal block

4.0 D6600 Specific Cards

4.1 D6640/D6641 Line Cards and D6645
Line Terminator Card
Figure 6: D6640/D6641 Line Card
1 – 48-pin connection to D6645 Line Termination
Card
2 – 40-pin connection to D6600 Back Plate
3 – LEDs (refer to Figure 8 on page 10)
Figure 7: D6645 Line Terminator Card
1
2
2
1 – 48-pin connection to D6640/D6641 Line Card
2 – Alignment Guide - Stabilizes the connection
and acts as a guide for connecting the
terminator card to the line card.
3 – Telco Line Jacks - Standard telephone lines
connect to the RJ11C jacks.
D6600 Specific Cards
1
2
3
3
9