Card Functions And Locations; Front Panel; Line Cards And Modules - Bosch D6600 Operation And Installation Manual

.
3.0 Card Functions and
Locations
3.1

Front Panel

Figure 1: D6600 Communications
Receiver/Gateway (front view)
1
1 - LCD - Shows up to 80 characters of information
(two lines of up to 40 characters each)
2 - Keypad - The D6600 has a 20-button keypad
for easy user interface.
Table 2 shows the state of the D6600's Power LED
using AC or battery power.
Table 2: Battery Supervision
Present
AC Battery
On X X
X
X
Off X X
X
X
Bosch Security Systems | 2/05 | 4998122704E
D6600 | Operation and Installation Guide | 3.0 Card Functions and Locations
2
Power LED Status
Green Clear
Solid Blinking
Table 3: System Trouble
No System Trouble
Any System Trouble*
* Refer to Appendix B: D6600 Internal Messages in the D6600
Computer Interface Manual (P/N: 4998122703). The
following items cause system trouble. Depending on the
supervision setting, the items indicated by ** might or might
not cause system trouble.
Battery Missing**
UPS AC Fail
Battery Bad**
UPS Battery Low
AC Fail
System Temperature High
3.2

Line Cards and Modules

Table 4: D6600 Line Cards and Modules
Name Model Description
Telephone D6640 Up to eight line cards can be installed
line card in one D6600 Receiver, for up to 32
telephone line connections.
Telephone D6641 Functions like the D6640. Includes
line card improved Public Switched Telephone
Network (PSTN) processing,
additional memory for future
enhancements, and single firmware
upgrade package.
CPU card D6610 The D6600 uses one CPU card. The
CPU card takes the incoming
information from the line card and
routes the information to an
automation port, the LCD on the front
of the receiver, and an external printer.
Power D6630 The power supply modules regulate
supply and the power used by the D6600. These
modules D6631 are not field serviceable.
Telephone D6645 Located behind the line card, the tele-
line phone line terminator card isolates
terminator and protects the line card against out-
card side voltage surges that might come
over the telephone line. Each line card
must have a line terminator card.
CPU D6615 Located behind the CPU card, the
terminator CPU terminator card provides the
card D6600 with two serial ports (COM3
and COM4), a parallel port (parallel
printer), and a general I/O port (I/O).
The serial ports can be used for
computer automation, PC connection
for programming, or NetCom
connection with a D6680.
System Trouble LED Status
Solid Red Clear
External Printing Error**
Line Fault**
COM# Error**
Line Card Trouble**
COM3 Trouble**
7