Factory Setting - NEC MultiSync LCD1550ME Service Manual

Table of Contents

3.6.3. Factory setting

1) Enter a signal input. (no prescribe)

2) Assume the FACTORY mode in the procedures of Paragraph 2.2.3 and display the SERVICE menu.

3) Press the NEXT key three times and advance to the tag |4|.

4) Use the (4) RIGHT or (3) LEFT keys and adjust the cursor to [OSD DESIGN],[OSM SELECT] and

[URL]. Set by pressing the (+) PLUS or (-) MINUS keys.

OSD DESIGN

OSM SELECT

URL

5) Press the EXIT key and withdraw from the SERVICE mode.

4-7

Table of Contents

Table of Contents

Do you have a question about the MultiSync LCD1550ME and is the answer not in the manual?

Multisync lcd1550me(b)Multisync lcd1550me-bk(b)