QMS 1660 Reference Manual page 39

Select Access the Administration menu
Select Access the Communications menu.
Next Advance to the Communications/Parallel
menu.
Select Access the Parallel menu.
Next Advance to the Parallel/Emulation menu. PARALLEL
Select Access the Emulation menu.
Previous Advance to the Emulation/PostScript
menu.
Select Select PostScript as the default
emulation.
After 3 seconds you are returned to the
Parallel/Emulation menu.
Sometimes, rather than selecting an option, you need to enter char-
acter information. A character is any letter, digit, or symbol. A field is a
group of characters that have meaning. Use the printer control panel
to enter character information in the message window during printer
configuration. The maximum length of the message window is 16
characters.
Entering character information through the control panel is similar to
setting the time and date on a digital watch. You enter one character
at a time. The current input character flashes. Use the following keys
to change the current input character:
Press this key... to...
Next
Previous
Advance to the next choice for the current input character.
Return to the previous choice for the current input
character.
ADMINISTRATION
COMMUNICATIONS
COMMUNICATIONS
TIMEOUTS
COMMUNICATIONS
PARALLEL
PARALLEL
MODE
EMULATION
EMULATION
ESP
EMULATION
POSTSCRIPT
POSTSCRIPT
IS SELECTED
PARALLEL
EMULATION