Using The Vehicle Dock From The Universal Xpress Car Kit - Sirius XM RAdio OnyX User Manual

Configuring Your Onyx

Using the Vehicle Dock From the Universal Xpress Car Kit

If you have chosen to use the Vehicle Dock from the
Universal Xpress Car Kit rather than the PowerConnect
Vehicle Dock included with your Onyx Radio, you will
need to complete some additional installation steps .
When you have completed these additional steps, you
can continue with the installation of your Onyx .
When you are using the Universal Xpress Vehicle
Dock, the screen will initially display "AUX Connected"
when you power on your Onyx . Ignore this message .
Once you have completed the steps below, it will not
be displayed again .
If you are connecting the audio through your vehicle's FM radio
(SureConnect or FMDA):
1. Disable the AUX Detect feature . Refer to "AUX Detect" on page 71,
and disable AUX Detect .
2. Turn the FM Transmitter in Onyx On . Refer to "Turn FM Transmitter On/
Off" on page 77, and turn the FM Transmitter On .
3. Continue with the installation .
If you are connecting the audio using the Aux In Cable or Cassette Adapter:
1. Disable the AUX Detect feature . Refer to "AUX Detect" on page 71,
and disable AUX Detect .
TIP! The FM Transmitter must be Off . To verify that the FM Transmitter is Off,
refer to "Turn FM Transmitter On/Off" on page 77 .
2. Continue with the installation .
76
AUX Connected
Audio enabled through
auxiliary line. FM turned OFF.