Antenna And Powerconnect Power - Sirius XM RAdio OnyX User Manual

Vehicle Installation
stripping around the door opening . Lift the weather stripping from the
opening and tuck the cable inside it, then replace the weather stripping .
Run the cable inside of the weather stripping to the bottom of the door
opening .
4. Pull the cable out of the weather stripping at the bottom of the door
opening and route it under the carpet toward the dashboard . Coil any
excess cable in a hidden location, such as under the carpet, keeping it
away from any vehicle pedals or controls . Secure the excess cable with
wire ties .
5. Bring the end of the cable out at the PowerConnect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock .
6. Continue with "Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter" on page 34 .
33