Step 1: Choose A Location For Your; Radio; Step 2: Install The Dash Or Vent Mount - Sirius XM RAdio OnyX User Manual

Vehicle Installation

Step 2: Install the Dash or Vent Mount

Follow the instructions on the next several pages for the mounting method
you have selected .
NOTE! The PowerConnect Vehicle Dock included with Onyx is compatible with
the T-slot style Dash and Vent Mounts . If you have an existing Dash Mount or
Vent Mount in your vehicle, you can continue to use it with this dock, and skip
this step .
Installing the Dash Mount:
CAUTION! The adhesive used on the Dash Mount may be
difficult to remove . Do not install this mount on leather
surfaces (contact your automobile dealership if you are
unsure about your dash surface), and make sure the air
temperature is at least 60°F (15°C) during installation . If it's
not at least 60°F, turn on the heater in your vehicle to bring
the temperature up to 60°F .
1. Locate a flat surface for the Dash Mount . Make sure there is ample
room for the PowerConnect Vehicle Dock and Onyx Radio when
installed .
2. Set the orientation of the Dash Mount before adhering it . Loosen the
knob and adjust the adhesive foot for the location you selected in
"Step 1: Choose a Location for
Your Radio" on page 11 .
• Option 1 & Option 3
should be oriented as I .
• Option 2 should be oriented
as II .
3. The dock mounting plate can
1 2
13