Kyocera TASKalfa 181 Operation Manual page 115

How to Display the Job Accounting Screen
Use the following procedure to display the Job Accounting screen.
1 Press the System Menu/Counter key.
2 Press the key or the
Accounting.
3
Press the Enter key.
4
Use the numeric keys to input the four-digit
management code. The management code set at the
factory is 1800 for the 18 ppm model and 2200 for the
22 ppm model.
Note
The four-digit management code can be changed. (See
Change on page 3-23.)
5 If the management code is accepted, the Job
Accounting screen is displayed.
Next, perform the setting referring to the following
description of each setting item.
key to select Job
System Menu / Counter :
Counter Check
Print Report
Job Accounting
Enter Pin Code using # key.
Administrator Management Code
Job Accounting :
End
Job Accounting Total
Each Job Accounting TL
Job Accounting
[ On ]
4-3