3.3.7
Transmit Inhibit
To Inhibit the transmit function on a desired channel press "E","9" immediately followed by the
channel "#" or "##" to be inhibited. Subsequent pressing of "E","9","#" or "E","9","##" will enable
the transmit function.
After inhibiting the transmit function, the Tx inhibited
channel must be recalled from memory for this function
to take effect.
Examples:
Press
Channel 1 frequency 119.750 MHz stored in the previous example will be displayed.
Press the PRESS TO TALK switch. Observe that the TX indicator LED lights.
Press
Press
Press the PRESS TO TALK switch. Observe that the TX indicator LED does not light.
Press
Press
Press the PRESS TO TALK switch. Observe that the TX indicator LED lights.
3.3.8
Toggling Between Two Channels
Press
Example:
Recall Channel 0 as described in para. 3.3.6 (Recalling a Stored Channel).
117.975 will be displayed.
Recall Channel 2
138.000 will be displayed.
Press
117.975 will be displayed.
Press
138.000 will be displayed.
TMS-150 91-DE Installation & Operating Instructions
TECHNISONIC INDUSTRIES LIMITED
www.til.ca
NOTE
or
Press
Press
or
Press
Press
Press
to recall previous channel.
3-9
(for 25 channels)
(for 25 channels)
(for 25 channels)
TiL 94RE146 Rev E