1. Manuals
  2. Brands
  3. Technisonic Industries Limited Manuals
  4. Accessories
  5. TiL-91-DE
  6. Installation and operating instructions manual

Technisonic Industries Limited TiL-91-DE Installation And Operating Instructions Manual

Vhf/am low cost base station
Hide thumbs Also See for TiL-91-DE:
Table of Contents

Advertisement

Quick Links

VHF/AM LOW COST BASE STATION
Model TiL-91-DE
LOW POWER BASE STATION SYSTEM P/N 910807
(TLC-150)
Installation and

Operating Instructions

TiL Document No. 92RE129
Rev. F
JULY 2012
Technisonic Industries Limited
240 Traders Boulevard, Mississauga, Ontario L4Z 1W7
Tel: (905) 890-2113 Fax: (905) 890-5338
www.til.ca
Copyright by Technisonic Industries Limited. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TiL-91-DE and is the answer not in the manual?

Questions and answers

Related Manuals for Technisonic Industries Limited TiL-91-DE

Summary of Contents for Technisonic Industries Limited TiL-91-DE

  • Page 1: Operating Instructions

    LOW POWER BASE STATION SYSTEM P/N 910807 (TLC-150) Installation and Operating Instructions TiL Document No. 92RE129 Rev. F JULY 2012 Technisonic Industries Limited 240 Traders Boulevard, Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 www.til.ca Copyright by Technisonic Industries Limited. All rights reserved.
  • Page 3 REVISION HISTORY [ 92RE129 ] SECTION Edited DESCRIPTION DATE - PAGE - Original Document Global New Document Template (new file format) Title page changed, Headers/Footers added Added Revision page, Added Warranty page Remove reference of 90-6R from document. FEB 2012 The 10 channel (memories) will no longer be available on all 91-DE based radios, ONLY 25.
  • Page 4 iiii...
  • Page 5 WARRANTY INFORMATION The Low Cost Base Station, TLC-150 is under warranty for one year from date of purchase. Failed units caused by defective parts, or workmanship should be returned to: Technisonic Industries Limited 240 Traders Boulevard Mississauga, Ontario L4Z 1W7...

  • Page 7: Table Of Contents

    BATTERY CHARGING ..................... 3-4 SECTION 4 TRANSCEIVER SET UP and OPERATING INSTRUCTIONS INTRODUCTION ....................... 4-1 4.1.1 Transceiver Model TiL-91-DE P/N 901006-2 ..............4-1 4.1.2 Scan Search and Toggle Modes ..................4-1 4.1.3 Technical Summary ......................4-1 OPERATOR'S SWITCHES, CONTROLS AND INDICATORS ......... 4-1 FRONT PANEL KEYPAD OPERATION (10 or 25 channel memories) ......
  • Page 8 TITLE PAGE Base Station Configurations ..................... 1-1 Remote Control Connector Signals ..................1-3 Model Til-91-DE Transceiver Leading Particulars ..............4-2 Operators Switches, Controls and Indicators ................4-4 Channel/Function Selector Keypad ..................4-6 TLC-150 91-DE Installation & Operating Instructions TiL 92RE129 Rev F...

  • Page 9: General Description

    This publication provides general information on the VHF/AM Low Cost Base Station System Nos. 910807 (TLC-150) manufactured by Technisonic Industries Limited. Specific information on the VHF/AM Transceiver Model TiL-91-DE can be found in Section 4 of this document. These Low Power Base Station Systems consist of a simplex transceiver complete with microphone, operating over the frequency range of 117.975 MHz to 138.000 MHz.

  • Page 10: Microphone P/N 861902

    TECHNISONIC INDUSTRIES LIMITED www.til.ca 1.2.3 Microphone P/N 861902-1 Microphone Assembly Part Number 861902-1, Series 1, is a rugged hand-held microphone housed in a high impact plastic case. The dynamic microphone is a noise cancelling type with a two-stage pre-amplifier, press-to-talk switch, and a retractable three-core cable terminated by a three-pin, male contacts, connector which mates with the MIC/PTT connector located on the front panel of the transceiver.

  • Page 11: Local/Remote Operation

    TECHNISONIC INDUSTRIES LIMITED www.til.ca 1.3.2 Local/Remote Operation (Option 2 required) The Low Cost Base Station can only be operated in the Remote mode if the transceiver is ordered with a remote 9-pin connector (extra cost option) which is located on the side of the transceiver chassis.
  • Page 12 TECHNISONIC INDUSTRIES LIMITED www.til.ca This page left intentionally blank. TLC-150 91-DE Installation & Operating Instructions TiL 92RE129 Rev F...

  • Page 13: Preparation For Use And Storage

    TECHNISONIC INDUSTRIES LIMITED www.til.ca SECTION 2 – PREPARATION FOR USE AND STORAGE INTRODUCTION This section provides the information required for use and storage of the low cost base station. Refer to Section 4 for Channel/Frequency configuration. DISASSEMBLY/ASSEMBLY 2.2.1 Remove Replace Microphone REMOVAL Disconnect microphone from front panel of transceiver.

  • Page 14: Loudspeaker, Headphone Installation

    TECHNISONIC INDUSTRIES LIMITED www.til.ca OPTIONAL LOUDSPEAKER, HEADPHONE INSTALLATION Provision is made for connection of an external loudspeaker or headphone to the SPEAKER/PHONE jack of the transceiver, as shown in Figure 4.1. 2.3.1 External Loudspeaker When an external loudspeaker is to be installed, an 8 ohm nominal impedance loudspeaker should be used.

  • Page 15: General Operating Instructions

    TECHNISONIC INDUSTRIES LIMITED www.til.ca SECTION 3 – GENERAL OPERATING INSTRUCTIONS INTRODUCTION This section covers general operating procedures applicable to all base station configurations. Set Up and Operating details for specific transceiver Models can be found in Section 4. PREPARATION FOR USE To prepare the transceiver for use (Refer to Figures 4.1, 4.2 and Table 4.2).

  • Page 16: Transmitter Operation

    TECHNISONIC INDUSTRIES LIMITED www.til.ca Ensure that the microphone connector is connected to the MIC/PTT connector of the transceiver. Set the SQUELCH control in the fully counter-clockwise (CCW) position. Set the VOLUME control in the 12 o'clock centre position. (10) Set the AC POWER, External Battery (if connected) and transceiver ON/OFF switch to "ON".

  • Page 17: Receiver Operation

    TECHNISONIC INDUSTRIES LIMITED www.til.ca RECEIVER OPERATION To operate the transceiver in the receive mode, proceed as follows: Ensure that the PRESS TO TALK switch on the microphone is NOT depressed, and verify that the Tx ON amber LED is OFF.

  • Page 18: Battery Charging

    TECHNISONIC INDUSTRIES LIMITED www.til.ca BATTERY CHARGING Set AC ON/OFF switch to OFF. Set External Battery ON/OFF switch to OFF. Connect the batteries to be charged, to the appropriate terminals located on the rear of the SPG-010 Power Supply/Charger. Set AC ON/OFF switch to ON.

  • Page 19: Introduction

    121.500 MHz. The TiL-91-DE transceiver was available in either 10 or 25 channel versions until July 2012. The 25 channel version can be identified by ‘25’ or ‘1283T’ on the option label on those units. All units manufactured after July 2012 are 25 channel only.
  • Page 20 TECHNISONIC INDUSTRIES LIMITED www.til.ca TABLE 4.1 MODEL TiL-91-DE TRANSCEIVER LEADING PARTICULARS GENERAL: Dimensions & Weight: Width ……………………………………………………………….……………. 216 mm (8.5 in) MAX Height ……………………………………………………………….….……….. 70 mm (2.75 in) MAX Depth …………………………………………………………………………. 260 mm (10.25 in) MAX Weight ………………………………………………………………………… 1.8 Kg (3 lb 15 oz) MAX TRANSMITTER: *Power Output (FCC) ..........…………………………...……...
  • Page 21 TECHNISONIC INDUSTRIES LIMITED www.til.ca Figure 4.1 Til-91-DE Low Cost Base Station Front Panel Layout Figure 4.2 Til-91-DE Low Cost Base Station Rear Panel Layout TLC-150 91-DE Installation & Operating Instructions TiL 92RE129 Rev F...
  • Page 22 TECHNISONIC INDUSTRIES LIMITED www.til.ca TABLE 4.2 OPERATORS SWITCHES, CONTROLS AND INDICATORS SWITCHES CONTROLS & FUNCTIONAL DESCRIPTION INDICATORS POWER A toggle switch applies the 13.7 volts nominal power supply to the ON/OFF transceiver. The transceiver is switched to ON in the toggle UP position and SWITCH is switched OFF in the toggle DOWN position.
  • Page 23 TECHNISONIC INDUSTRIES LIMITED www.til.ca TABLE 4.2 OPERATORS SWITCHES, CONTROLS AND INDICATORS (Continued) SWITCHES CONTROLS & FUNCTIONAL DESCRIPTION INDICATORS LIQUID A 5½ digit Liquid Crystal Display (LCD) displays the FREQUENCY/ CRYSTAL CHANNEL that the transceiver is currently operating on. In SCAN mode it DISPLAY displays the current frequency scanned if RF signal is present.

  • Page 24: Front Panel Keypad Operation (10 Or 25 Channel Memories)

    FRONT PANEL KEYPAD OPERATION Note: The TiL-91-DE transceiver was available in either 10 or 25 channel versions until July 2012. The 25 channel version can be identified by ‘25’ or ‘1283T’ on the option label on those units. All units manufactured after July 2012 are 25 channel only.

  • Page 25: Keypad "Beeps

    TECHNISONIC INDUSTRIES LIMITED www.til.ca 4.3.1 Keypad "Beeps" Audible "Beeps" are generated when a key is pressed (default condition). Beeps can be enabled/disabled by toggling the "E","8" keys. Press to disable Key "Beeps". Press to enable Key "Beeps". 4.3.2 Keypad and LCD Display Lighting Three Display and keypad lighting modes are available to the operator.

  • Page 26: Selecting A Frequency

    TECHNISONIC INDUSTRIES LIMITED www.til.ca 4.3.4 Selecting a Frequency To select a frequency, press the keypad digits in the sequence indicated (Refer to Fig 4.2 Base Station Front and Rear Panel Layout, and Table 4.2 Operators Switches Controls and Indicators). 1st digit - must be 1 for 100 MHz, all other digits are ignored.

  • Page 27: Storing A Frequency To A Channel

    TECHNISONIC INDUSTRIES LIMITED www.til.ca 4.3.5 Storing a Frequency to a Channel Up to 10 Frequencies can be stored and recalled in channels 0 to 9 as follows or, up to 26 Frequencies can be stored and recalled in channels 00 to 25 as follows: Enter the frequency to be stored as described in paragraph 4.3.4 (Selecting a Frequency)

  • Page 28: Transmit Inhibit

    TECHNISONIC INDUSTRIES LIMITED www.til.ca 4.3.7 Transmit Inhibit To Inhibit the transmit function on a desired channel press "E","9" immediately followed by the channel "#" or “##” to be inhibited. Subsequent pressing of "E","9","#" or "E","9","##" will enable the transmit function.

  • Page 29: Search Mode

    TECHNISONIC INDUSTRIES LIMITED www.til.ca 4.3.9 Search Mode In SEARCH MODE the receiver steps through each stored channel until a transmitted signal is found. The receiver will lock on to the first signal strong enough to quiet the squelch circuit. SEARCH mode is exited when a signal is found. Normal operation resumes as if the SEARCH frequency was selected from the keypad or recalled from memory.

  • Page 30: Tlc-150 91-De Installation & Operating Instructions Til 92Re129 Rev F

    TECHNISONIC INDUSTRIES LIMITED www.til.ca Figure 4.3 Fixed Channel Jumper Locations TLC-150 91-DE Installation & Operating Instructions TiL 92RE129 Rev F 4-12...

  • Page 31: System Configuration

    TECHNISONIC INDUSTRIES LIMITED www.til.ca CHANNEL FREQUENCY SELECTION The following procedure disables keypad entry of frequencies so that the operator will only be able to select stored channels for receive or transmit. 4.4.1 System Configuration Configure channel frequencies as desired (Refer to Section 4.3.5).
  • Page 32 TECHNISONIC INDUSTRIES LIMITED www.til.ca This page left intentionally blank TLC-150 91-DE Installation & Operating Instructions TiL 92RE129 Rev F 4-14...
  • Page 33 Tel: (905) 890-2113 Fax: (905) 890-5338 IMPORTANT WARRANTY All communication equipment manufactured by Technisonic Industries Limited is warranted to be free of defects in Material or Workmanship under normal use for a period of one year from Date of Purchase by the end user.

Table of Contents