Visor Tracks - GE ZV800SJSS Technical Service Manual

Visor Tracks

The visor tracks are mounted on each side of the
canopy.
To remove the visor tracks:
1. Remove the visor. (See
2. Remove the 2 Phillips-head screws and 7 mm
hex nuts that attach the right track to the
canopy.
3. Slide the right track inward to clear the canopy,
then remove it.
4. Remove the 2 Phillips-head screws and 7 mm
hex nuts that attach the left track to the canopy.
5. Slide the left track inward to clear the canopy.
)
Visor.
Canopy
Right Side Track
6. Remove the 2 Phillips-head screws that attach
the ribbon receptacle to the left track.
7. Remove the single Phillips-head screw that holds
the black ribbon protector in place.
Ribbon Receptacle
Left Side Track
– 11 –
Ribbon Protector