Welcome! System Requirements for Setup Hardware requirements Congratulations on your purchase of the AVFX-100-TR, Analog Video/Audio and Serial I/O optical extender. This manual contains information that will assist you You have a graphic controller card with a DVI port in your in installing and operating the product.
Installation Step 4 Important: Please use the installation procedure below. Improper or no In the same way as above, connect the Receiver module to the display by VGA copper cable and to the audio output equipments such as media operation may result if the start-up sequence is not correctly followed. receiver or speaker by audio cable.
RS-232 Baud rate and AUTO Installation Notice: Please DO NOT look directly into the LC receptacles of Uplink module, while they are powered on, although they are regulated strictly enough to operate under the Laser Class 1, classified by CDRH/FDA for eye The Tx,Rx Baud rate is installed with switch 1,2,3.(switch 4 is only Auto function) safety.
Check that all AC and DC plugs and jacks used by external power Compliance with VGA standard: supports using fiber-optic supplies (both Opticis and others) are firmly connected. communication links and DDC2B. Ensure that power LED lit ON.
Opticis warrants this Digital Video/Audio and Serial I/O Optical Extender to be free from defects in workmanship and materials, under normal use and service, for a period of one (1) year from the date of purchase from Opticis or its authorized resellers.