Advertisement
© 2011 Opticis. All Rights Reserved
Revision 1.3
www.opticis.com
DVI/USB/RS-232 and Audio
Optical Extender
User's Manual
Opticis Locations
for the M5-1003
Headquarters
Opticis Co., Ltd.
#304, Byucksan Technopia, 434-6
Sangdaewon-Dong, Chungwon-Ku,
Sungnam City, Gyeonggi-Do, 462-716
South Korea
Tel: +82 (31) 737-8033~8
Fax:+82 (31) 737-8079
www.opticis.com
For order support, please contact your Distributor or Reseller.
For technical support, check with the Opticis web site www.opticis.com or
contact techsupp@opticis.com.
Advertisement
Table of Contents
Related Manuals for opticis DVI/USB/RS-232 and Audio Optical Extender
Summary of Contents for opticis DVI/USB/RS-232 and Audio Optical Extender
- Page 1 #304, Byucksan Technopia, 434-6 Sangdaewon-Dong, Chungwon-Ku, Sungnam City, Gyeonggi-Do, 462-716 South Korea Tel: +82 (31) 737-8033~8 Fax:+82 (31) 737-8079 www.opticis.com For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site www.opticis.com or contact techsupp@opticis.com.
- Page 2 Manual Contents Welcome! __________________________________________ Congratulations on your purchase of the M5-1003, DVI/USB/RS-232 and audio Manual Contents optical extender. This manual contains information that will assist you in Welcome, Product Description installing and operating the product. System Requirements for Setup Product Description Installation Operation Guide M5-1003 offers extremely long extension of DVI, USB, serial control data and...
-
Page 3: System Requirements For Setup
System Requirements for Setup Installation Hardware requirements Important: Please use the installation procedure below. Improper or no operation may result if the start-up sequence is not correctly followed. Local display and remote display should have same Step 1 graphic resolution. - Page 4 Step 4 Operation Guide Connect the Receiver module to the remote display, keyboard and mouse. If necessary, connect the RS232 cable and the audio cable to audio output Selection of Control Position device and RS-232 device. For proper RS-232 cable type, please refer to Fig Switch for decision of control position Figure 7 –...
-
Page 5: Self-Edid Programming Procedure
Self-EDID Programming Procedure RS-232 Cabling The graphic source equipment generally requires communication of display 1. When you connect PC to PC over RS-232 with M5-1003, please use male information (EDID). Display information (EDID) contains resolution and timing to female straight type cable between PC and M5-1003-TX and male to information for your display. -
Page 6: Troubleshooting
Compliance with DVI standard: supports DVI 1.0 of DDWG, using Check that all AC and DC plugs and jacks used by external power fiber-optic communication links and DDC2B. supplies (both Opticis and others) are firmly connected. Compliance with USB 1.1 standard ... -
Page 7: Warranty Information
(2) this device must accept any interference received, including interference that service, for a period of one (1) year from the date of purchase from Opticis or may cause undesired operation. This equipment has been tested and found to its authorized resellers.
Need help?
Do you have a question about the DVI/USB/RS-232 and Audio Optical Extender and is the answer not in the manual?
Questions and answers