Table of Contents
Advertisement
Chapter 3
PCI PIRQ [A-D]#
Available options: [Disabled] and [Enabled].
Wake up Events
1. Power On By PCI / Onbd LAN
When enabled, a PCI interface that receives a signal will wake up the system from soft
off and green mode.
2. Power On by Modem
When enabled, a Modem will be able to receive a signal and wake up the system from
soft off and green mode. You should connect the modem to the COM port and call your
PC to power on.
3. Wake Up on LAN (WOL)
When enabled, a LAN that receives a signal will wake up the system from soft off and
green mode.
4. USB KB Wake-Up From S3
Allows the activity of USB device to wake up the system from S3 power saving modes.
Settings are [Enabled] and [Disabled].
5. Power On by Alarm
When enabled, this setting allows the system to turn back on at a designated time of the
month. User must designate date of month and time of day.
This function is only available when using an ATX power supply and the Software
Power-Off function to turn off the computer.
6. POWER ON Function
This controls whether the PS/2 mouse or keyboard can power on the system. Available
settings are [Password], [Hot KEY], [Mouse Move], [Mouse Click], [BUTTON ONLY]
and [Keyboard 98].
7. KB Power ON Password
Sets keyboard power on password to protect the system.
8. Hot Key Power On
Available options: [Ctrl-F1] through [Ctrl-F12].
32
Advertisement
Table of Contents
