Aaeon 9LIF5 User Manual page 28

Chapter 3
3. Typematic Delay (Msec)
The typematic delay sets how long after you press a key that a character begins
repeating.
Security Option
The Supervisor and/or User Password functions shown in Figure 3-1 must be set to take
advantage of this function. See Section 3.11 for password setting information. When the
Security Option is set to System, a password must be entered to boot the system or enter
the BIOS setup program. When the Security Option is set to Setup, a password is
required to enter the BIOS setup program.
APIC Mode
This item can enable or disable the APIC (Advanced Programmable Interrupt
Controller). Due to compliance to PC2001 design guide, the system is able to run in
APIC mode. Enabling APIC mode will expand available IRQs resources for the system.
Available options are [Enabled] and [Disabled].
MPS Version Control For OS
This item allows you to select which MPS (Multi-Processor Specification) version to be
used for the operating system. You need to select the MPS version that is supported by
your operating system. To find out which version to use, consult the vendor of your
operating system. Available options are [1.4] and [1.1].
OS Select (For DRAM >64MB)
If your system's DRAM is larger than 64MB and you are running OS/2, select OS/2 as
the item value. Otherwise, set the item value to Non-OS/2 for all other operating systems.
Small Logo (EPA) Show
This setup allows photo that is EPA. Logo.
Show POST CODE
Enabling this function can show POST error code on the screen before proceeding to
operating system.
24