Securing The Base - Elo TouchSystems B-Series User Manual

Securing the Base

When mounting the B-Series touchcomputer, the baseplate must be removed and
mounted on a flat surface. Use the four pre-tapped holes to secure the baseplate
from below the mounting surface before reattaching the touchcomputer as shown
below. The holes are designed to work with ISO metric M6 screws. Mounting
screws are not included with the product. Refer to the figure below for the location
of the holes. All dimensions are in millimeters.
Mounting Diagram
1)
2)
B-S T U G 3
ERIES OUCHCOMPUTER SER UIDE