Relay Play; Power On Play - Denon DN-D4500MK2 Owner's Manual

Relay play

What is relay play?
Playback relays between deck 1 and deck 2.
n CD playback
A disc loaded in the next deck will be played after playback of the current track when
the playback modes of deck 1 and deck 2 are set to
tracks in the current disc when those modes are set to
n USB playback
Files in the folder of the next deck will be played after playback of the current file when
the playback modes of deck 1 and deck 2 are set to
in the current folder when those modes are set to
• If both a CD (track) and USB memory device (file) are loaded in each deck, relay playback between the
CD and the USB memory device is possible.
Performing relay playback
1
Press CONT./SINGLE on the first deck to select the playback mode,
CONT CONT./SINGLE
., then hold down
The SINGLE or CONT. indicator flashes in the display. Turn
2
CONT./SINGLE
Press on the second deck to select the playback mode,
CONT .
The SINGLE or CONT. indicator flashes in the display. Turn
3
Press PLAY/PAUSE of the first deck.
Relay playback starts.
4
To stop the relay playback, press
*If not stopped, relay playback is repeated.
SINGLE , or after playback of all
CONT.
SINGLE
, or after playback of all files
CONT.
SINGLE
to select the relay mode.
SEL.
to select a track or file.
SEL.
to select a track or file.
CUE
on the deck currently played.

Power on play

This mode enables playback to start automatically from the first track of the loaded CD when powering on.
1
CD
Load a into the deck.
2
Hold down – PRESET
3
SEL
Turn . to select "Power Play".
4
Press SEL . to display "P.PlayON".
5
Press – PRESET .
"Now Saving" is shown.
Playback automatically starts from the first track when powering on.
Power on play can be set on CD drives 1 and 2, respectively.
or
SINGLE
or
See the illustration on the previous page for details of the buttons used for the
22
operations on this page.
Operations during playback
.