Rear Panel - Denon DN-D4500MK2 Owner's Manual

Rear panel

w w
e q e q r
y
t
u
n DN-D4500MK2 Rear panel
q
Analog output jacks 1, 2
(ANALOG OUT 1, 2)
• These are unbalanced output jacks. The audio
signals from the both players are output from
these jacks.
w
Digital output jacks 1, 2
(DIGITAL OUT 1, 2)
• Digital data is available from this jack.
• Use 75 Ω/ohms pin cord for connection.
• We recommend you use braided wire type
shielded cable.
NOTE
The playback level after analog conversion is set
to –6dB bellow the usual level to avoid digital
distortion.
e
Fader input jacks 1, 2 (FADER 1, 2)
• Use this when your mixer has Fader Start
function with 3.5 mm stereo mini cord.
r
Remote control connector
(REMOTE)
• Connect the supplied 8pin din cable to the
RC-D45MK2 control unit.
10
Part names and functions
CAUTION
To completely disconnect this product from the
mains, disconnect the plug from the wall socket
outlet.
The mains plug is used to completely interrupt the
power supply to the unit and must be within easy
access by the user.
t
USB2 port
• Insert a USB memory device or connect a
HDD.
y
AC inlet (AC IN)
n RC-D45MK2 Rear panel
u
Control connector
• Connect the opposite side of supplied 8 pin din
cable to the DN-D4500MK2 (main unit).