To Play Audio Cds - Denon DN-300C User Manual

Playing Audio CDs

To play audio CDs:

1. If the unit is off, press the Power Button to power it on.
Important: Do not insert a CD when the power is off. Doing so may damage the unit.
2. Insert a CD into the CD slot. (Hold the edges of the CD without touching the recorded surface. Be
careful not to trap your fingers when the disc is drawn into the unit.)
Important: This unit can play finalized discs only. (Finalization is the process that makes recorded CD-
R discs playable on compatible players.)
3. Select CD as the media type (described in
The CD will start playing automatically.
In CD Mode, you can perform any of the following operations:
• To start, resume, or pause playback, press the Play/Pause Button.
• To stop playback, press the Stop Button.
• To rewind or fast-forward through the track, press and hold one of the Search Buttons. The track
will rewind/fast-forward at 5 times the normal playback speed. To resume playback, release the
button.
• To skip directly to a track:
1. Press one of the Number Buttons (0–9) to enter the desired track number. If the track number is
two digits, press the buttons in succession (e.g., 1 then 2 for Track 12).
2. Turn the Jog Dial on the unit, and then press it.
• To select a Repeat Playback mode, press the Repeat Button. It will cycle through Repeat One (the
same track will repeat indefinitely), Repeat All (the list of all tracks will repeat indefinitely), and Repeat
Off (no tracks will repeat).
• To select the Play Mode, press the Random Button. It will cycle through Normal (the CD will play
from the current track to the end of the CD and then stop), Single (the current track will play until its
end and then stop), and Random (the tracks will play in a random order [for up to 256 tracks]).
• To change the Time Mode in the display, press the Time Button. It will cycle through Elapsed (how
much time has elapsed of the current track), Remaining (how much time remains of the current track),
and Total Remaining (how much time remains of all remaining tracks).
• To eject a CD, press the Eject Button when the unit is stopped or paused. Ejecting will appear in the
display while ejecting the CD. No Disc will appear when there is no disc in the CD slot.
For information about playing CDs with audio files, please see
Important: Please see
supports and for more information about CD handling and care.
Other Information > CDs
Selecting the Media Playback
Playing Audio
to learn more about the types of CDs the DN-300C
Mode).
Files.
7