Adjusting The Track End Time - Denon DN-D4500MK2 Owner's Manual

In normal playback or pause, press EXIT/RELOOP
n If the current playback position is before the A-B positions,
• "Exit Off" is shown in the display.
• When the playback position passes the A point (start point) manual loop playback starts automatically.
n If the current playback position is after the A-B positions,
• Moves the playback point to the A point (start point) and manual loop playback starts.
EXIT/RELOOP
If the is pressed before the playback point passes the A point (start point), "Exit Loop" is
shown in the display, and normal playback resumes.
n Exiting auto loop playback
During auto loop playback, press EXIT/RELOOP
Auto loop playback exits, and normal playback resumes.
n Stutter
Stutter effect can be used at A1 and A2 points set as a loop start point.
1
Press FLIP repeatedly until "STR A1" is shown in the display.
changes to , and the player enters the stutter mode.
2
A1
Hold down to stutter A1 point.
3
To return to the loop play mode, press
the display.
A2 point can be stuttered in the same way.
n Changing the end point of manual loop playback
During manual loop playback or pause, press
playback.
• The B point (end point) is moved to the position where B was pressed.
n Exiting manual loop playback
During manual loop playback, press
"Exit Loop" is shown in the display, and normal playback resumes.
n Returning to manual loop playback
In normal playback, press EXIT/RELOOP
The playback position moves to the A point (start point) and manual loop playback starts.
.
.
FLIP
repeatedly until "H/S A1" is shown in
B at the position where you want to end
EXIT/RELOOP
.
.
n Adjusting loop points
1
During manual loop playback, press
2
Turn the jog wheel while listening to the playback sound, and move to the position
where you want to end playback.
• It can be adjusted in 1 frame units.
GAdjustable rangeH
It can be adjusted from 1 frame after the A point (start point) to the end of the track.
A
z Adjustment range for B point
3
Press B at the position where you want to end playback.
B point (end point) adjustment is complete.
B2 point for A2 point can be adjusted in the same way.
n Clear the A1/A2 point
FLIP A1
While pressing the press the or
FLIP/B TRIM
Press for more than 1 sec to clear both A1 and A2 points at once.

Adjusting the track end time

n Brake
1
Press BRAKE.
The BRAKE LED lights.
2
PLAY/PAUSE
Press during playback.
The ending time of the track is delayed, and the characteristic like an analog player is obtained.
See the illustration on the previous page for details of the buttons used for the
20
operations on this page.
(2) Starting playback from the Middle of a track (Manual Se
Operations during playback
• When the track is selected with the TRACK SELECT knob o and the PLAY
playback starts from the beginning of that track. If you wish to start from
procedure described below to search for the desired position.
A1
.
Find the play start position.
Turn the shuttle ring !7 to change the
playback position quickly. (Search for the
approximate playback position.)
The fast forward/reverse mode
is set when the shuttle ring
SEARCH SCAN
6 7
(outer side) !7 is turned.
The speed changes according to
the angle at which the ring is
1
RVS FWD
RVS FWD
turned.
• When operated during playback, playback
resumes after the operation.
• When playback is started, the jog wheel is
set to the bend mode.
z
• When turned fully in either direction, the
playback position jumps about 10 seconds.
B
The jump time can be selected in the preset
End of the track
+3 f mode from 10, 20, 30 or 60 sec.
Turn the jog wheel y. (Search for the precise
playback position.)
When the jog wheel (inner side)
SEARCH
SCAN
y is turned, the frame move
6 7
mode is set.
The playback position can be
2 moved in units of one frame.
RVS FWD
Listen to the sound and find the desired play
start position.
A2
to clear the corresponding A and B points. NOTE:
• For MP3 discs, frames are not displayed,
however frame resolution is audible by turning
the jog wheel (inner side) y.
Shockproof memory
• A maximum of app
uncompressed audio d
(per drive). This guards
to external mechanica
or other hard vibration
• If advanced data read
scratches or dirt on
once the data stored u