Denon DN-D4500MK2 Owner's Manual page 14

Denon dual digital media player owner's manual
Table of Contents

Advertisement

Q8
Shuttle ring (outer ring)
• This control is used to select the scanning
direction and speed.
The CD is scanned in the forward direction
when the shuttle ring is turned clockwise from
the center position. To scan backwards, the
shuttle ring is turned counterclockwise.
• The scanning speed increases as the wheel is
turned further.
Q9
Disc holder OPEN/CLOSE button
• Press this button to open and close the disc
holder.
• The disc holder will not open during playback.
Stop playback before pressing this button.
W0
FLIP/B TRIM button
• Press this button to switch between the loop
mode/hot start mode and stutter mode.
• After setting the B point, the B TRIM MODE
can be selected.
W1
A1, A2 buttons
• Press these buttons to set the start point for
loop playback (point A-1 or A-2).
• Press these buttons to use the stutter and hot
start functions.
W2
B button
• Press this button to set the end point for loop
playback (point B).
W3
EXIT/RELOOP button
• When this button is pressed during a seamless
loop, the track resumes back to normal play
from the B point. (EXIT)
When pressed again, the playback jumps back
into your A-B seamless loop. (RELOOP)
Part names and functions
W4
TITLE/
MEMO button
• CD TEXT:
When there is CD text data, the CD text data
is displayed automatically or when the button
is pressed.
If no TEXT is available, the display will indicate
"No TEXT".
• MP3:
When an MP3 file has ID-3 tag data, the title,
artist name and album name can be selected
and displayed each time the button is pressed.
• MEMO:
The memo mode starts when this button is
pressed once in the CUE mode.
W5
BACK,
PRESET button
• BACK
Pressing this button during the folder search
displays the folder one level up.
• PRESET:
When this button is pressed for more than 1
sec, the PRESET mode starts.
NOTE
Memo's can not be set for MP3 files.
W6
SOURCE select buttons
(CD/USB1/USB2)
• When "CD" is selected, the CD LED lights.
• When "USB1" is selected, the USB1 Green
LED lights.
• When "USB2" is selected, the USB2 Red LED
lights.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents