Deleting An Item Entry; Deleting All Item Entries; Memory Accumulator; Entering Alphanumeric Characters - Transcell Technology TC-2010 Series Setup & Operation Manual

7. Once all fields are edited, press the Done soft key. The scale confirms that you wish to
save the changes.
8. Press the Yes soft key to save the changes. Otherwise, press the No soft key.
NOTE: By default, the operator is not allowed to make changes to the APW or Tare values.
You may edit the APW and Tare values by pressing the APW or TARE soft keys in the edit
item screen, and then continue to follow the prompts.
4.2.4

DELETING AN ITEM ENTRY

1. Press the Item ID soft key. The scale prompts for the Item ID number.
2. Press the List soft key to delete by Item ID (see note 1) or press the Product ID key
(see note 2) to delete by Product ID.
NOTE 1: If you do not know the four digit Item ID number, press the LIST soft
key. The scale displays the screen shown in Figure 4-1. Four Item Ids are
shown for each screen. Use the up/down arrow soft keys to move within the four
Item Ids shown. Use the PgUp and PgDn soft to recall additional groups of four
Item Ids. If your list of Item Ids is long, press the ENT key and the scale prompts
"Input Item ID:" Enter the starting Item Id number and the list will begin with that
number
NOTE 2: If you wish to key in the Product ID rather than the sequential Item ID,
Press the ITEM ID soft key, then press the KEYIN soft key and the scale
prompts "Enter Product ID". Enter the Product ID and press ENT. The scale
loads the record information.
3. Once the desired item is highlighted, press the More soft key.
4. Press the Delete soft key. The scale asks you to confirm this action.
5. Press the Yes soft key to delete the item or press the No soft key to exit without deleting.
4.2.5

DELETING ALL ITEM ENTRIES

NOTE: This procedure erases ALL items from memory storage. Once
completed, this procedure cannot be undone. Use with extreme caution.
1. Press the * key. The scale prompts for the menu you wish to enter.
2. Select the Item ID soft key. The scale prompts for a password.
3. Enter in the password (6666). There is no need to press the ENT key.
4. Press the Int Item soft key. The scale asks you to confirm this action.
5. Press the Yes soft key to erase all of the items from memory. The scale confirms the
action and returns to the previous screen. Press the No soft key to exit without
deleting.
6. Press the CLR key twice to return to normal operating mode.
4.3

MEMORY ACCUMULATOR

Your scale comes equipped with a handy memory accumulator, which can be used in
conjunction with the piece counting feature. As with a hand-held calculator, the memory
accumulator can be added to, displayed and cleared at anytime. If an item ID is loaded into
TABLE 4-1: Entering Alphanumeric Characters
18