Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Transcell Technology tcs3t series
Summary of Contents for Transcell Technology tcs3t series
- Page 1 MODEL TCS3T Series User Manual DIGITAL COUNTING SCALE Revision 1.3 March 17, 2014...
-
Page 2: Table Of Contents
Contents I. Introduction ....................1 II. Specifications ..................2 III. Safety Tips ..................... 3 IV. Preparing the scale for use ..............4 V. Parts Illustration ..................5 VI. Display Information ................6 VII. Keypad Information................8 VIII. Main Functions ................... 9 IX . -
Page 3: Introduction
I. Introduction Transcell Technology, Inc., founded in 1981, is an ISO 9001 registered enterprise group which manufactures precision weighing instruments and sensors. Our major products include load cells, digital indicators, scales, and automated control equipment. Our products have been placed in service throughout the world including North and South America, Europe, South and East Asia and Australia. -
Page 4: Specifications
II. Specifications 1. Load cell: FATS Series 2. Product Matrix: Model Weighing specification Size (cm) TCS-6LB 6 lb x 0.0002 lb (3 kg x 0.1 g) 13.4” x 11.8” x 4.3” TCS-12LB 12 lb x 0.0005 lb (6 kg x 0.2 g) 13.4”... -
Page 5: Safety Tips
III. Safety Tips THIS EQUIPMENT CONTAINS NO USER SERVICEABLE COMPONENTS. Servicing of the equipment must only be carried out by trained and authorized personnel. Use scale only with 120 VAC power outlets. Routine maintenance Harsh abrasives, solvents, scouring cleaners and alkaline cleaning solutions should not be used; especially on the display window. -
Page 6: Preparing The Scale For Use
IV. Preparing the scale for use Refer to the following figure for the following instructions. 1. Please place the scale on a steady table. 2. Place the tray onto the scale and adjust the four feet until the scale does not rock back and forth on the table. -
Page 7: Parts Illustration
V. Parts Illustration... -
Page 8: Display Information
VI. Display Information Digital display screens 1. Weight There are 5-1/2 digits in total to display the weight on the tray. 2. Unit weight There are 5-1/2 digits in total to display the unit weight. 3. Pieces There are 6 digits to display the quantity of the parts on the tray. Annunciators ( “... - Page 9 Annunciators ( “ ”) / Continued 4. STABLE ： I ndicates that the scale is stable; 5. ACC ： I ndicates that the accumulator is in use; ： 6. ADD I f the weight on the tray is less than the minimum piece weight, this symbol will appear which means that the item on the tray is too light to count.
-
Page 10: Keypad Information
VII. Keypad Information 1. TRGT ： U sed to set a target quantity prior to counting. Key-in the target quantity and then press TRGT. When the number of items placed on the tray exceeds the target quantity, the scale sounds an alarm and flashes “ ”;... -
Page 11: Main Functions
VIII. Main Functions Counting 1. Piece weight is unknown （ ） P lace the items you are sampling onto the tray Stable Weight of the item on the tray （ ） E nter the quantity of the sample currently on the tray Stable Weight of the item on the tray Quantity of the sample... - Page 12 Accumulator (M+) Piece accumulator (scale must be in counting mode) （ ） P lace the items on the tray Stable Quantity of the item Weight of the item on the tray Single weight of the item （ ） P ress the “M+” key （...
- Page 13 Weighment Accumulator （ ） Place the item on the tray when the scale is at zero Stable Weight of the item on the tray （ ） P ress the “M+” key （ ） A fter stable Total M+ weight Total quantity of M+ （...
- Page 14 Clearing the accumulator value Press “MC” key to clear the accumulator value and the symbol “ ”. Programming the preset slots for known unit weights To preset up to 10 groups of piece weights, you switch to counting mode and then save the values in slots “1-10”. （...
- Page 15 （ ） P ress “UWT PST” key to recall the preset piece weight Stable Target Setup Program the target value when scale is in counting mode. An alarm sounds when the number of pieces on the try exceeds the programmed target value. In addition, the display flashes （...
- Page 16 The weight of the container is known （ ） W hen the scale is at zero, input the weight of the container using the “0-9”keys. Stable （ ） P ress the “TARE” key （ ） D isplay after 2 seconds Stable Clearing the tare value After removing both the item and the container from the tray, the display will show a...
-
Page 17: Serial Port Information
IX . Serial Port Information The TCS is plug and play compatible with the Transcell MP-20 printer. If you have a different printer, use the following information to make the proper connections: Hardware The TCS serial port is realized in an RS-232C compatible male DSUB9 connector. See illustrations below for pin outs: Pin No. -
Page 18: Limited Warranty
Twelve (12) months from date of shipment from manufacturer. These warranties are made upon the express condition that: 1) Transcell Technology, Inc. is given prompt written notice upon discovery by Buyer of such non-conformity, with a detailed explanation of the alleged deficiencies;... -
Page 19: Troubleshooting
XI. Troubleshooting Fault Cause of fault Solution Description A breeze, draft, vibration or Eliminate the source of other kind of interference is the interference or move present in the area of use the scale to another area Scale is not stable There are foreign objects Remove the tray, inspect wedged between the tray and... - Page 20 ©Transcell Technology, Inc. 2007-2014. All rights reserved. Contents subject to change without notice. Transcell Technology, Inc. 975 Deerfield Parkway Buffalo Grove, IL 60089 Tel (847) 419-9180 Fax (847) 419-1515 Web: www.transcell.com...