Auto Or Carbon Setting - Toshiba DP5000-Series User Manual

Headset and Handset Operation

AUTO or CARBON Setting

AUTO or CARBON Setting
There exist two types of headsets: ECM and Carbon. The default setting on the
telephones is AUTO. When the headset is connected to the Headset Modular
Connector of the telephone, the AUTO setting enables the headset I/F current detector
to determine which headset type is connected (EMC or Carbon). If the current is
marginal using a carbon headset (only) and performance is not good, change the
setting to CARBON.
To change the setting from Auto to Carbon
Telephones: All except the Single Line Telephone
1. Press
2. Press
3. Press
FB3, LED On: CARBON
FB3, LED Off: AUTO (default)
4. Press
5. Go off-hook, then on-hook to exit the program mode.
Telephones: Single Line Telephone
1. Press
2. Press
3. Press
Msg LED On: CARBON
Msg LED Off: AUTO (default)
4. Press
5. Go off-hook, then on-hook to exit the program mode.
80
3+6+9+Hold
(simultaneously).
Spdial
.
FB3
to toggle On/Off.
Hold
to set the option.
3+6+9+Hold
(simultaneously).
Spdial 3
and press .
Msg
to toggle On/Off.
Hold
to set the option.
Strata CIX DP5000-series Telephone UG 11/08