Chapter 7 - Administrator Programming; Functions - Toshiba DP5000-Series User Manual

Administrator Programming
This appendix contains some of the functions that can be performed using
Administrator Mode.
Important!
• These functions require Strata CIX 5.1 or higher system software.
• To access the Admin mode, the telephone must be enabled for these functions in
system programming using eManager. Refer to "Strata CIX Programming Manual,
Volume 1" for eManager programming.

Functions

Use the Soft Keys on the telephone to program the following functions in
Administrator mode:
• Phone Name – enter the Extension (PDN) name for any telephone in the Strata
CIX
• Door Name – enter door phone name
• System SD/Name
• Station SD/Name
• CO Line Name – CO line names
• DNIS Name – DNIS names
• Phone Key Label – button names on the electronic telephone key strips
• LM Key Label – button names on the Add-on module key strip
1 The Admin telephone mode allows speed dial names to be programmed, but the actual speed dial numbers
are programmed using the speed dial programming procedures described in the User Guide.
Strata CIX DP5000-series Telephone UG
1
– system speed dial names
1
– station speed dial names for any telephone in the system
11/08
7
95