Culligan 9" Owner's Manual page 35

Brining Type (Downflow, Upflow, Proportional)
BRINING TYPE
>Downflow
Tank Diameter (9, 10, 12, 14)
TANK DIAMETER
>10
Water Hardness (1–170)
HARDNESS GPG
25 (1109 GAL)
Completed First Time Setup
Initializing
JAN-01-13 12:01P
SOFTENING
JAN-01-13 12:01P
The controller is designed to simplify the setup and installation process by making some default recom-
mendations during the Initial Setup. The default settings are designed to be appropriate for most common
installations.
The screen displays the brining type setting. Press
to change this setting to Downflow and view the next setting,
then
TANK DIAMETER.
The screen displays the tank diameter setting. Press
to change the value and view the next setting, WATER
and then
HARDNESS.
The screen displays the water hardness setting in grains per gallon. Press
or and then
When the setup is complete, the circuit board microprocessor automat-
ically calculates softener capacity. The screen displays the initializing
status and the current date and time, and then transitions to the home
screen.
The screen displays the current state (the display alternates between Soft-
ening and any error) and the date/time set for the unit. This is the default
home screen.
to change the value and begin initialization.
or and
or
01021076
31