Culligan 9" Owner's Manual page 22

01021076
18
Attaching the Cover
Once the drain and brine line is connected, re-attach the cover.
1. Insert the two pins on the top of the cover into the two holes on top of the frame; the cover
should be slightly angled. See Figure 10.
2. Rotate the cover downward inserting the two pins on the side of the cover into the two holes on
side of the frame. See Figure 11.
3. Attach the cover fastener onto the control valve. See Figure 12.
Figure 10. Cover fastener clip.
Push down
into place
Figure 11. Reattaching the HE softener cover.
A
Cover
Fastener
Figure 12. Reattaching the cover fastener.