User Guide
2.3
System modifications
Only qualified installers may carry out modifications on the following components:
▪ The heat pump unit
▪ The pipes for the refrigerant, brine and water
▪ The power supply
▪ The safety valves
Do not carry out construction installations that may affect the operational safety of the heat pump.
2.4
Safety valves
▪ Never block the connection to a safety valve's overflow pipe.
▪ The following safety precautions apply to the hot water circuit's safety valve with corresponding over-
flow pipe: Water expands when it is heated, which means that a small amount of water is released from
the system via the overflow pipe. The water that exits the overflow pipe can be hot! Therefore, allow it
to flow to a floor drain to prevent any risk of burning yourself.
6
Domestic heat pumps
VUGFE102
Danfoss Heating Solutions