Control System; Keypad; Indicator - Danfoss DHP-A User Manual

User Guide
4

Control system

The heat pump has an integrated control system which automatically calculates the heat demand in the house
to ensure that the correct amount of heat is produced and emitted when necessary.
The control system is operated using a keypad and information is shown in a display and by an indicator.
N
ROOM
NO HEAT DEMAND
OPERAT. AUTO
4.1

Keypad

+ Plus sign used to scroll up a menu or increase the values.
- Minus sign used to scroll down a menu or reduce the values.
> Right arrow used to select a value or open a menu.
< Left arrow to cancel selection or exit a menu.
4.2

Indicator

The indicator at the bottom of the control panel has three modes:
▪ Not lit means that the heat pump is not powered.
▪ Green continuously lit, means that the heat pump has power and is ready to produce heat or hot water.
▪ Flashing green light, means an active alarm.
Danfoss Heating Solutions
Domestic heat pumps
The information in the display and menus will vary depending heat pump model
and connected accessories.
20°C
3
1
2
1 Keypad
2 Indicator
3 Display
VUGFE102
11