Connecting To A Wireless Internet Network Manually - Samsung LED 6400 Series E-Manual

Connecting to a Wireless Internet Network Manually

Network > Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway and DNS values manually to connect to the network. To get the IP address, subnet mask,
gateway and DNS values, contact your Internet Service Provider (ISP).
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
11
Setting the Network Type
Network Settings
Select your network type.
Network Type
Wireless network
AP0000
AP0001
Add Network
Refresh
21
Select the network (SSID) you want to connect to. If the wireless router doesn't appear in the list,
select Add Network, and enter the network's SSID manually.
31
Enter the security key and select OK. If the selected network is not security-enabled, the TV
attempts to connect right away.
41
Select Stop when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
Network Settings
Connection verification cancelled.
Wireless network connection test stopped.
Change Network
to Wireless
Wireless
WPS(PBC)
IP Settings.
IP Settings Retry
automatically displays a list of available wireless networks.
You can connect your TV to the
internet. Please select which
wireless network to use.
Close