Connecting To A Wired Internet Network Automatically; Connecting To A Wired Internet Network Manually - Samsung LED 6400 Series E-Manual

Connecting to a Wired Internet Network Automatically

Network > Network Settings
Automatically connect to an available network.
11
Set the Network Type
21
The TV attempts to connect to an available network. Once successful, you will see a confirmation
message. Select OK. If the attempt fails, try again, or connect manually.

Connecting to a Wired Internet Network Manually

Network > Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway, and DNS values manually to connect to the network. To get these values, contact your
Internet Service Provider (ISP).
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
11
Set the Network Type
Network Settings
Select your network type.
Network Type
Try Now
to Wired, and then select Connect.
to Wired, and then select Connect.
Wired
Connect
You can connect your TV
to the internet.