Controlling The Tv With Your Voice (Voice Control); Enabling Voice Control - Samsung LED 6400 Series E-Manual

Controlling the TV with Your Voice (Voice Control)

"
Availability depends on the specific model.
System > Voice Control
You can access and select certain menu options and functions using voice commands. For more
effective voice recognition, speak slowly and clearly in the language specified in the
Control > Language
"
Voice Control is classified into two: interactive voice control that enables conversational instructions, and
imperative voice control where only pre-defined instructions are used. Smart Hub setup, and time settings,
as well as the user's agreement on the use terms. Trying the interactive voice control without completing
any of these requirements will display a notification pop-up. Follow the onscreen instructions and complete
the necessary settings. The imperative voice control is available regardless of the interactive voice control
settings. Use only "pre-defined commands" in the imperative voice control mode.
"
Please read through the instructions before using Voice Control. For more information, refer to "Read Before
Using Voice, Motion, or Face Recognition".
"
If you use the Voice Control
name from Voice Control

Enabling Voice Control

11
Press the VOICE
screen when Voice Control
21
Say a command. You can use Voice Control to operate the TV when you are watching the TV or
other videos.
"
Say the command from 10cm to 15cm away from the microphone on the Samsung Smart Control. Voice
commands may not be recognised properly if you speak too softly or loudly. The optimal volume for voice
commands is between 75 dB and 80dB.
Using the Voice Recognition Tutorial
Support > Voice Recognition Tutorial
This lets you familiarise yourself with the basics of using Voice Control. Run
Tutorial from the Support
option.
function interactively at least once, the TV will change the on-screen menu
to Voice Interaction.
button on the Samsung Smart Control. The microphone icon appears on the
is enabled.
menu, or run Voice Control and say "Tutorial".
System > Voice
Voice Recognition